JBC C105-113 Conical Tip (1mm x 0.3mm)

Description

*** These tips only work with the JBC NASE-1B and JBC NASE-2B series soldering units.  They do NOT work with the JBC CD-1B or JBC NASE-1C or JBC NASE-2C series units ***
This tip has replaced our use of the c105-112 knife tip because it lasts much longer than the knife tip.  We use this tip to clean the pads after a chip has been removed.  We also use this tip for soldering when there is extra space available.  It's really great for soldering connector pins.  You definitely need one of these tips for soldering ground pins and pads because of the extra thermal mass required versus the smaller 0.1mm tips, which don't work very well on ground pins/pads.
They work on the NT105 Nano iron and NP105 Nano tweezers.  Make sure that you set your temperature to around 290C or lower to preserve the tips, otherwise, they’ll wear out a lot faster. They are crazy expensive, so it’ll be in your best interest to preserve them.
We were able to get our hands a bunch of these tips. These are genuine, original, and new JBC tips. You’ll receive 1 tip.